Electric chamfering machine

Self-propelled type is particularly effective for R-chamfering of long workpieces.

Electric / self-propelled type

Single sided type

 

 

MSA-3R

Self-propelled and easy
●It can be attached easily to the linear portion of the steel plate.
●Automatic traveling to the material rear end or stopper by one setup.

 

Types of chamfers R3 (R2, C1, C2 can be processed) (Note 1)
Processing Plate Thickness Min9mm~Max50mm
Working plate width 150mm or more (Rib height 80mm or more)
Cutter 3 blades (Clockwise rotation)
Inserts Insert (3 pcs)
No-load rotational speed 2,000/2,400min-1 50/60Hz
Self-propelled speed 1,275/1,530mm/min  50/60Hz
Power supply / output 200V (3 phases) 400W
Machine dimensions 210×370×400mm
Weight 16kg

(Note 1) Dedicated cutters and inserts are required for other than R3 processing.

 

 

ESA-3R

High speed self-propelled type / energy saving type
●Cutting speed is 4.1 (m / min), about 3 times faster
●The rigidity of the self-propelled roller gear part (Worm) is increased by about 6 times.
●To protect the motor control driver, the control panel is placed separately from the main body.
●With the adoption of the ultra-small motor, weight is rarely increased due to the rigidity improvement.

 

Types of chamfers R3 (R2, C1, C2 can be processed) (Note 1)
Processing Plate Thickness Min9mm~Max100mm
Working plate width 150mm or more (Rib height 100mm or more)
Cutter For R3-R 3-Blades (Clockwise rotation)
Inserts R3 cermet carbide insert (3 pcs)
No-load rotational speed 4,270min-1
Self-propelled speed 4,100mm/min
Electric motor DC Brushless Motor (Equivalent to 750 W)
Machine dimensions 250×320×515mm
Weight Unit: 17kg (Approx.), Control panel: 7kg

(Note 1) Dedicated cutters and inserts are required for other than R3 processing.

 

 

MKA-4C

Powerful type that can also process R5

●Powerful type that can also process R5
●Up to C4, R5 processed by powerful cutting.
●The drive source is electricity only (AC200V)

Types of chamfers C4 (R2 ~ R5, C1 ~ C3 can be processed) (Note 1)
Processing Plate Thickness Min9mm~Max50mm
Working plate width 150mm or more (Rib height 100mm or more)
Cutter 3 blades (Clockwise rotation)
Inserts Carbide insert (3 pcs)
No-load rotational speed 2,100/2,500min-1 50/60Hz
Self-propelled speed 1,250/1,500mm/min  50/60Hz
Electric motor 200 V (3 phases) 750 W
Machine dimensions 260×320×600mm
Weight 32kg

(Note 1) Dedicated cutters and inserts are required for other than C4 processing.

 

 

Electric/self-propelled type Double sided type

Simultaneous front/back processing

MWA-3R

●With one installation, it is ideal for performing extremely smooth R or C chamfering on both the upper and lower surfaces at the same time.

 

Types of chamfers R3 (R2, C1, C2 can be processed) (Note 1)
Processing Plate Thickness Min9mm~Max50mm
Working plate width 150mm or more (Rib height 80mm or more)
Cutter 3-Blades (One for right rotation and one for left rotation)
Inserts Carbide R insert (6 pcs)
No-load rotational speed 2,000/2,400min-1 50/60Hz
Self-propelled speed 1,275/1,530mm/min 50/60Hz
Power supply / output 200V (3 phases) 400W × 2
Machine dimensions 490×240×490mm
Weight 39.5kg

(Note 1) Dedicated cutters and inserts are required for other than R3 processing.

 

 

 

Products listed in this catalog are subject to change without notice due to product improvement, specifications.

 

宮川工業株式会社

http://www.miyakawa.com